Vinyl composite tile or VCT is one of the most sought-after types that are affordable for the average person. When laying the tiles, it is essential to obtain accurate measurements of the room where the tile is to be. A person also needs an abrasive blade, v-notch trowel and tape measurement as well as VCT tile glue to use. Place the tiles on a straightand square wall first. It is not glued down as of yet. Place the tiles so they’re placed in an arrangement that is straight or in an alternate, depending on your preference. Place the tiles one-quarter inch from the wall to allow for expansion and contraction. Prior to cutting, you should plan the lengths of the tiles. There may be a need to cut both the ends, or only one at a moment. The floor should be prepared for use by cleaning it well and making sure it is dry. Apply a thin layer of glue, one row at a time. Install the starter tile, close to the edges of the wall. Press firmly on the tile in the middle and press it until it reaches the outer edges. Next, place the second one on top of it, and check that seams match. Keep doing this until you’ve finished the floor. huzql9edj8.