Cisco IP phones are used in professional and commercial situations for communication. To utilize them, they need to be properly set up. The YouTube video “How to Setup Cisco Phone” outlines the steps to set up a Cisco Phone” details the steps in properly setting up an Cisco Phone.
If you are creating the Cisco IP phone initial step involves fixating the base. It is accomplished by attaching it securely to the back of the handset, where the base was designed to sit. Once you have set up the base then connect the handset cable with the phone. The longest end of the cord plugs to the handset while it’s short ends go into the handset. Make sure that you connect the cord to the HAC compartment.
It is essential that the Cisco IP phone needs to connect to the internet for it to work. The cable for the network should be plugged inside the “SW” area inside the phone. The second end must be connected directly into the router. If desired then it is possible to connect the Cisco IP phone can also connect via a cord to the laptop. Once the connections are made and the phone is connected, it can be used.